1. Locks level for safe transportation.
2. Can use on smaller sport vehicles.
3. Deck extender pulls out from under the unit, reducing the angle of incline on taller vehicles.
4. Tilt feature eliminates the need for separate ramps.
5. Tilts to passenger side for loading/unloading away from traffic (double-position carrier tilts both ways).
6. Manufactured with all-steel construction and powdercoated for durability.
7. 400 lb. capacity racks.
8. Requires a 2" frame-mounted, class 3 or greater, receiver hitch.

Model 410ACR

A 1-place tilt-able Motorcycle carrier that hitches to a frame-mounted 2" class III or better receiver hitch.

They are designed for transporting a wide range of MotoCross, Enduro, and other off-road bikes.

Model 410 CR is perfectly sized for sport scooters. The perfect rack fit means more on the road safty. Wheather it is a quick drive to the store or a weekend trip to a campsite, the 410ACR lets you take your scooter wherever you want to go.

These racks allows you to carry your Motorcycle behind the smaller space used by sports vehicles because they are very light. You hardly realize it is back there.

Model 722ABK

Model 410ACR shown here with optional Model 722ABK second position add on.

A handy add-on section to the 410ACR, making it a 2-place cycle carrier. If the 410ACR is purchased with the intentions of adding the other half later, the 720CR tongue-weight limitations for the host vehicle and receiver hitch must be noted.

Get it now, and you'll be ready for all the upcoming rallies and great outdoor fun!

Step 1. Release the hitch-pin on the tongue, pull out the deck extender, and lower the ramp.	Step 2. Push your cycle on the ramp and it automtically levels.
Step 3. latch the hitch-pin on the tongue and push the deck extender back into the rack	Step 4. Secure the cycle with safty straps. That's it.